Combi Flash EX 655 Spécifications télécharger pdf (Page 20)

20 Translation of the original operation manual

MDFE_mAtex_1307_en • jw

Unit description

3.4 Accessories

3.4.1 Temperature Gauge

The Temperature Gauge Pic. 3.3 to read the

temperature at the material outlet of the Fluid

Heater.

Pic. 3.3

Materialdurchusserhitzer mit

Hochdrucklter und Tempera-

turanzeige

3.4.2 Circulation Valve

The return flow control valve Pic. 3.4 is used for circulation systems.

Circulating avoids heat loss of material in hoses or feed lines during pauses

in spraying.

If a circulation valve is used, a spray gun with two inbound fluid hoses must be

used. These hoses are then mounted to the outbound connection on the Fluid

Heater and the inbound connection on the circulation valve Pic. 3.4.

The circulation valve is to be mounted in the

direction of material flow between the material

pump and suction hose. Please note the arrow

on the valve housing.

Depending on the pump model, the circulation

valve either comes standard Pic. 3.6 or optional-

ly Pic. 3.5 with a pressure drain valve.

The desired circulation speed can be set using

the regulating knob Pic. 3.4, pos.1.



Flow Direction



Pic. 3.4

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 37 38

Pas de commentaire

Combi Flash EX 655 Spécifications Page 20